Skip to main content

Labelled

jetstream_rpc::subscription

Struct Labelled 

Source 
pub struct Labelled<K, T, D> { /* private fields */ }
Expand description

A subscription that says which one it is. Unpin, so it goes straight into select_all.

Trait Implementations§

Source§

impl<K: Clone + Unpin, T, D> Stream for Labelled<K, T, D>

Source§

type Item = (K, Result<Item<T, D>, Error>)

The key accompanies the failure as well as the item.

r[impl jetstream.subscription.surface.composition] This used to yield a bare Err, which throws away the one thing Labelled exists to keep. In a fan-in over several rooms, a transport failure, a decode failure or a producer failure ends one input and the caller could not tell which — so it could neither retry that room nor report it, which is the same loss the rule forbids for the successful end.

Source§

fn poll_next( self: Pin<&mut Self>, cx: &mut Context<'_>, ) -> Poll<Option<Self::Item>>

Attempt to pull out the next value of this stream, registering the current task for wakeup if the value is not yet available, and returning None if the stream is exhausted. Read more
§

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the stream. Read more

Auto Trait Implementations§

§

impl<K, T, D> !RefUnwindSafe for Labelled<K, T, D>

§

impl<K, T, D> !Sync for Labelled<K, T, D>

§

impl<K, T, D> !UnwindSafe for Labelled<K, T, D>

§

impl<K, T, D> Freeze for Labelled<K, T, D>
where K: Freeze, Subscription<T, D>: Freeze,

§

impl<K, T, D> Send for Labelled<K, T, D>
where K: Send, Subscription<T, D>: Send,

§

impl<K, T, D> Unpin for Labelled<K, T, D>
where K: Unpin, Subscription<T, D>: Unpin,

§

impl<K, T, D> UnsafeUnpin for Labelled<K, T, D>
where K: UnsafeUnpin, Subscription<T, D>: UnsafeUnpin,

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> BufferedStreamExt for T
where T: Stream + ?Sized,

§

fn buffered_ordered(self, n: usize) -> BufferedOrdered<Self>
where Self::Item: Future, Self: Sized,

An adaptor for creating a buffered list of pending futures. Read more
§

fn buffered_unordered(self, n: usize) -> BufferUnordered<Self>
where Self::Item: Future, Self: Sized,

An adaptor for creating a buffered list of pending futures (unordered). Read more
§

fn for_each_concurrent<Fut, F>( self, limit: usize, f: F, ) -> ForEachConcurrent<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = ()>, Self: Sized,

Runs this stream to completion, executing the provided asynchronous closure for each element on the stream concurrently as elements become available. Read more
§

impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
where ST: ?Sized, DT: ?Sized,

§

impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
where ST: ?Sized, DT: ?Sized,

Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<D> OwoColorize for D

§

fn fg<C>(&self) -> FgColorDisplay<'_, C, Self>
where C: Color,

Set the foreground color generically Read more
§

fn bg<C>(&self) -> BgColorDisplay<'_, C, Self>
where C: Color,

Set the background color generically. Read more
§

fn black(&self) -> FgColorDisplay<'_, Black, Self>

Change the foreground color to black
§

fn on_black(&self) -> BgColorDisplay<'_, Black, Self>

Change the background color to black
§

fn red(&self) -> FgColorDisplay<'_, Red, Self>

Change the foreground color to red
§

fn on_red(&self) -> BgColorDisplay<'_, Red, Self>

Change the background color to red
§

fn green(&self) -> FgColorDisplay<'_, Green, Self>

Change the foreground color to green
§

fn on_green(&self) -> BgColorDisplay<'_, Green, Self>

Change the background color to green
§

fn yellow(&self) -> FgColorDisplay<'_, Yellow, Self>

Change the foreground color to yellow
§

fn on_yellow(&self) -> BgColorDisplay<'_, Yellow, Self>

Change the background color to yellow
§

fn blue(&self) -> FgColorDisplay<'_, Blue, Self>

Change the foreground color to blue
§

fn on_blue(&self) -> BgColorDisplay<'_, Blue, Self>

Change the background color to blue
§

fn magenta(&self) -> FgColorDisplay<'_, Magenta, Self>

Change the foreground color to magenta
§

fn on_magenta(&self) -> BgColorDisplay<'_, Magenta, Self>

Change the background color to magenta
§

fn purple(&self) -> FgColorDisplay<'_, Magenta, Self>

Change the foreground color to purple
§

fn on_purple(&self) -> BgColorDisplay<'_, Magenta, Self>

Change the background color to purple
§

fn cyan(&self) -> FgColorDisplay<'_, Cyan, Self>

Change the foreground color to cyan
§

fn on_cyan(&self) -> BgColorDisplay<'_, Cyan, Self>

Change the background color to cyan
§

fn white(&self) -> FgColorDisplay<'_, White, Self>

Change the foreground color to white
§

fn on_white(&self) -> BgColorDisplay<'_, White, Self>

Change the background color to white
§

fn default_color(&self) -> FgColorDisplay<'_, Default, Self>

Change the foreground color to the terminal default
§

fn on_default_color(&self) -> BgColorDisplay<'_, Default, Self>

Change the background color to the terminal default
§

fn bright_black(&self) -> FgColorDisplay<'_, BrightBlack, Self>

Change the foreground color to bright black
§

fn on_bright_black(&self) -> BgColorDisplay<'_, BrightBlack, Self>

Change the background color to bright black
§

fn bright_red(&self) -> FgColorDisplay<'_, BrightRed, Self>

Change the foreground color to bright red
§

fn on_bright_red(&self) -> BgColorDisplay<'_, BrightRed, Self>

Change the background color to bright red
§

fn bright_green(&self) -> FgColorDisplay<'_, BrightGreen, Self>

Change the foreground color to bright green
§

fn on_bright_green(&self) -> BgColorDisplay<'_, BrightGreen, Self>

Change the background color to bright green
§

fn bright_yellow(&self) -> FgColorDisplay<'_, BrightYellow, Self>

Change the foreground color to bright yellow
§

fn on_bright_yellow(&self) -> BgColorDisplay<'_, BrightYellow, Self>

Change the background color to bright yellow
§

fn bright_blue(&self) -> FgColorDisplay<'_, BrightBlue, Self>

Change the foreground color to bright blue
§

fn on_bright_blue(&self) -> BgColorDisplay<'_, BrightBlue, Self>

Change the background color to bright blue
§

fn bright_magenta(&self) -> FgColorDisplay<'_, BrightMagenta, Self>

Change the foreground color to bright magenta
§

fn on_bright_magenta(&self) -> BgColorDisplay<'_, BrightMagenta, Self>

Change the background color to bright magenta
§

fn bright_purple(&self) -> FgColorDisplay<'_, BrightMagenta, Self>

Change the foreground color to bright purple
§

fn on_bright_purple(&self) -> BgColorDisplay<'_, BrightMagenta, Self>

Change the background color to bright purple
§

fn bright_cyan(&self) -> FgColorDisplay<'_, BrightCyan, Self>

Change the foreground color to bright cyan
§

fn on_bright_cyan(&self) -> BgColorDisplay<'_, BrightCyan, Self>

Change the background color to bright cyan
§

fn bright_white(&self) -> FgColorDisplay<'_, BrightWhite, Self>

Change the foreground color to bright white
§

fn on_bright_white(&self) -> BgColorDisplay<'_, BrightWhite, Self>

Change the background color to bright white
§

fn bold(&self) -> BoldDisplay<'_, Self>

Make the text bold
§

fn dimmed(&self) -> DimDisplay<'_, Self>

Make the text dim
§

fn italic(&self) -> ItalicDisplay<'_, Self>

Make the text italicized
§

fn underline(&self) -> UnderlineDisplay<'_, Self>

Make the text underlined
Make the text blink
Make the text blink (but fast!)
§

fn reversed(&self) -> ReversedDisplay<'_, Self>

Swap the foreground and background colors
§

fn hidden(&self) -> HiddenDisplay<'_, Self>

Hide the text
§

fn strikethrough(&self) -> StrikeThroughDisplay<'_, Self>

Cross out the text
§

fn color<Color>(&self, color: Color) -> FgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the foreground color at runtime. Only use if you do not know which color will be used at compile-time. If the color is constant, use either [OwoColorize::fg] or a color-specific method, such as [OwoColorize::green], Read more
§

fn on_color<Color>(&self, color: Color) -> BgDynColorDisplay<'_, Color, Self>
where Color: DynColor,

Set the background color at runtime. Only use if you do not know what color to use at compile-time. If the color is constant, use either [OwoColorize::bg] or a color-specific method, such as [OwoColorize::on_yellow], Read more
§

fn fg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> FgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the foreground color to a specific RGB value.
§

fn bg_rgb<const R: u8, const G: u8, const B: u8>( &self, ) -> BgColorDisplay<'_, CustomColor<R, G, B>, Self>

Set the background color to a specific RGB value.
§

fn truecolor(&self, r: u8, g: u8, b: u8) -> FgDynColorDisplay<'_, Rgb, Self>

Sets the foreground color to an RGB value.
§

fn on_truecolor(&self, r: u8, g: u8, b: u8) -> BgDynColorDisplay<'_, Rgb, Self>

Sets the background color to an RGB value.
§

fn style(&self, style: Style) -> Styled<&Self>

Apply a runtime-determined style
§

impl<T> Pointable for T

§

const ALIGN: usize

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
§

impl<T> PolicyExt for T
where T: ?Sized,

§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] only if self and other return Action::Follow. Read more
§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] if either self or other returns Action::Follow. Read more
§

impl<T> Read<Exclusive, BecauseExclusive> for T
where T: ?Sized,

Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> StreamExt for T
where T: Stream + ?Sized,

§

fn next(&mut self) -> Next<'_, Self> ⓘ
where Self: Unpin,

Creates a future that resolves to the next item in the stream. Read more
§

fn into_future(self) -> StreamFuture<Self> ⓘ
where Self: Sized + Unpin,

Converts this stream into a future of (next_item, tail_of_stream). If the stream terminates, then the next item is None. Read more
§

fn map<T, F>(self, f: F) -> Map<Self, F>
where F: FnMut(Self::Item) -> T, Self: Sized,

Maps this stream’s items to a different type, returning a new stream of the resulting type. Read more
§

fn enumerate(self) -> Enumerate<Self>
where Self: Sized,

Creates a stream which gives the current iteration count as well as the next value. Read more
§

fn filter<Fut, F>(self, f: F) -> Filter<Self, Fut, F>
where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Filters the values produced by this stream according to the provided asynchronous predicate. Read more
§

fn filter_map<Fut, T, F>(self, f: F) -> FilterMap<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = Option<T>>, Self: Sized,

Filters the values produced by this stream while simultaneously mapping them to a different type according to the provided asynchronous closure. Read more
§

fn then<Fut, F>(self, f: F) -> Then<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future, Self: Sized,

Computes from this stream’s items new items of a different type using an asynchronous closure. Read more
§

fn collect<C>(self) -> Collect<Self, C> ⓘ
where C: Default + Extend<Self::Item>, Self: Sized,

Transforms a stream into a collection, returning a future representing the result of that computation. Read more
§

fn unzip<A, B, FromA, FromB>(self) -> Unzip<Self, FromA, FromB> ⓘ
where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Sized + Stream<Item = (A, B)>,

Converts a stream of pairs into a future, which resolves to pair of containers. Read more
§

fn concat(self) -> Concat<Self> ⓘ
where Self: Sized, Self::Item: Extend<<Self::Item as IntoIterator>::Item> + IntoIterator + Default,

Concatenate all items of a stream into a single extendable destination, returning a future representing the end result. Read more
§

fn count(self) -> Count<Self> ⓘ
where Self: Sized,

Drives the stream to completion, counting the number of items. Read more
§

fn cycle(self) -> Cycle<Self>
where Self: Sized + Clone,

Repeats a stream endlessly. Read more
§

fn fold<T, Fut, F>(self, init: T, f: F) -> Fold<Self, Fut, T, F> ⓘ
where F: FnMut(T, Self::Item) -> Fut, Fut: Future<Output = T>, Self: Sized,

Execute an accumulating asynchronous computation over a stream, collecting all the values into one final result. Read more
§

fn any<Fut, F>(self, f: F) -> Any<Self, Fut, F> ⓘ
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Execute predicate over asynchronous stream, and return true if any element in stream satisfied a predicate. Read more
§

fn all<Fut, F>(self, f: F) -> All<Self, Fut, F> ⓘ
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Execute predicate over asynchronous stream, and return true if all element in stream satisfied a predicate. Read more
§

fn flatten(self) -> Flatten<Self>
where Self::Item: Stream, Self: Sized,

Flattens a stream of streams into just one continuous stream. Read more
§

fn flatten_unordered( self, limit: impl Into<Option<usize>>, ) -> FlattenUnorderedWithFlowController<Self, ()>
where Self::Item: Stream + Unpin, Self: Sized,

Flattens a stream of streams into just one continuous stream. Polls inner streams produced by the base stream concurrently. Read more
§

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F>
where F: FnMut(Self::Item) -> U, U: Stream, Self: Sized,

Maps a stream like [StreamExt::map] but flattens nested Streams. Read more
§

fn flat_map_unordered<U, F>( self, limit: impl Into<Option<usize>>, f: F, ) -> FlatMapUnordered<Self, U, F>
where U: Stream + Unpin, F: FnMut(Self::Item) -> U, Self: Sized,

Maps a stream like [StreamExt::map] but flattens nested Streams and polls them concurrently, yielding items in any order, as they made available. Read more
§

fn scan<S, B, Fut, F>(self, initial_state: S, f: F) -> Scan<Self, S, Fut, F>
where F: FnMut(&mut S, Self::Item) -> Fut, Fut: Future<Output = Option<B>>, Self: Sized,

Combinator similar to [StreamExt::fold] that holds internal state and produces a new stream. Read more
§

fn skip_while<Fut, F>(self, f: F) -> SkipWhile<Self, Fut, F>
where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Skip elements on this stream while the provided asynchronous predicate resolves to true. Read more
§

fn take_while<Fut, F>(self, f: F) -> TakeWhile<Self, Fut, F>
where F: FnMut(&Self::Item) -> Fut, Fut: Future<Output = bool>, Self: Sized,

Take elements from this stream while the provided asynchronous predicate resolves to true. Read more
§

fn take_until<Fut>(self, fut: Fut) -> TakeUntil<Self, Fut>
where Fut: Future, Self: Sized,

Take elements from this stream until the provided future resolves. Read more
§

fn for_each<Fut, F>(self, f: F) -> ForEach<Self, Fut, F> ⓘ
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = ()>, Self: Sized,

Runs this stream to completion, executing the provided asynchronous closure for each element on the stream. Read more
§

fn for_each_concurrent<Fut, F>( self, limit: impl Into<Option<usize>>, f: F, ) -> ForEachConcurrent<Self, Fut, F> ⓘ
where F: FnMut(Self::Item) -> Fut, Fut: Future<Output = ()>, Self: Sized,

Runs this stream to completion, executing the provided asynchronous closure for each element on the stream concurrently as elements become available. Read more
§

fn take(self, n: usize) -> Take<Self>
where Self: Sized,

Creates a new stream of at most n items of the underlying stream. Read more
§

fn skip(self, n: usize) -> Skip<Self>
where Self: Sized,

Creates a new stream which skips n items of the underlying stream. Read more
§

fn fuse(self) -> Fuse<Self>
where Self: Sized,

Fuse a stream such that poll_next will never again be called once it has finished. This method can be used to turn any Stream into a FusedStream. Read more
§

fn by_ref(&mut self) -> &mut Self

Borrows a stream, rather than consuming it. Read more
§

fn catch_unwind(self) -> CatchUnwind<Self>
where Self: Sized + UnwindSafe,

Catches unwinding panics while polling the stream. Read more
§

fn boxed<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + Send + 'a>>
where Self: Sized + Send + 'a,

Wrap the stream in a Box, pinning it. Read more
§

fn boxed_local<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + 'a>>
where Self: Sized + 'a,

Wrap the stream in a Box, pinning it. Read more
§

fn buffered(self, n: usize) -> Buffered<Self>
where Self::Item: Future, Self: Sized,

An adaptor for creating a buffered list of pending futures. Read more
§

fn buffer_unordered(self, n: usize) -> BufferUnordered<Self>
where Self::Item: Future, Self: Sized,

An adaptor for creating a buffered list of pending futures (unordered). Read more
§

fn zip<St>(self, other: St) -> Zip<Self, St>
where St: Stream, Self: Sized,

An adapter for zipping two streams together. Read more
§

fn chain<St>(self, other: St) -> Chain<Self, St>
where St: Stream<Item = Self::Item>, Self: Sized,

Adapter for chaining two streams. Read more
§

fn peekable(self) -> Peekable<Self>
where Self: Sized,

Creates a new stream which exposes a peek method. Read more
§

fn chunks(self, capacity: usize) -> Chunks<Self>
where Self: Sized,

An adaptor for chunking up items of the stream inside a vector. Read more
§

fn ready_chunks(self, capacity: usize) -> ReadyChunks<Self>
where Self: Sized,

An adaptor for chunking up ready items of the stream inside a vector. Read more
§

fn forward<S>(self, sink: S) -> Forward<Self, S> ⓘ
where S: Sink<Self::Ok, Error = Self::Error>, Self: Sized + TryStream,

A future that completes after the given stream has been fully processed into the sink and the sink has been flushed and closed. Read more
§

fn split<Item>(self) -> (SplitSink<Self, Item>, SplitStream<Self>)
where Self: Sized + Sink<Item>,

Splits this Stream + Sink object into separate Sink and Stream objects. Read more
§

fn inspect<F>(self, f: F) -> Inspect<Self, F>
where F: FnMut(&Self::Item), Self: Sized,

Do something with each item of this stream, afterwards passing it on. Read more
§

fn left_stream<B>(self) -> Either<Self, B> ⓘ
where B: Stream<Item = Self::Item>, Self: Sized,

Wrap this stream in an Either stream, making it the left-hand variant of that Either. Read more
§

fn right_stream<B>(self) -> Either<B, Self> ⓘ
where B: Stream<Item = Self::Item>, Self: Sized,

Wrap this stream in an Either stream, making it the right-hand variant of that Either. Read more
§

fn poll_next_unpin(&mut self, cx: &mut Context<'_>) -> Poll<Option<Self::Item>>
where Self: Unpin,

A convenience method for calling [Stream::poll_next] on Unpin stream types.
§

fn select_next_some(&mut self) -> SelectNextSome<'_, Self> ⓘ
where Self: Unpin + FusedStream,

Returns a Future that resolves when the next item in this stream is ready. Read more
§

impl<S> StreamExt for S
where S: Stream + ?Sized,

§

fn poll_next(&mut self, cx: &mut Context<'_>) -> Poll<Option<Self::Item>>
where Self: Unpin,

A convenience for calling [Stream::poll_next()] on !Unpin types.
§

fn next(&mut self) -> NextFuture<'_, Self> ⓘ
where Self: Unpin,

Retrieves the next item in the stream. Read more
§

fn try_next<T, E>(&mut self) -> TryNextFuture<'_, Self> ⓘ
where Self: Stream<Item = Result<T, E>> + Unpin,

Retrieves the next item in the stream. Read more
§

fn count(self) -> CountFuture<Self> ⓘ
where Self: Sized,

Counts the number of items in the stream. Read more
§

fn map<T, F>(self, f: F) -> Map<Self, F>
where Self: Sized, F: FnMut(Self::Item) -> T,

Maps items of the stream to new values using a closure. Read more
§

fn flat_map<U, F>(self, f: F) -> FlatMap<Self, U, F>
where Self: Sized, U: Stream, F: FnMut(Self::Item) -> U,

Maps items to streams and then concatenates them. Read more
§

fn flatten(self) -> Flatten<Self>
where Self: Sized, Self::Item: Stream,

Concatenates inner streams. Read more
§

fn then<F, Fut>(self, f: F) -> Then<Self, F, Fut>
where Self: Sized, F: FnMut(Self::Item) -> Fut, Fut: Future,

Maps items of the stream to new values using an async closure. Read more
§

fn filter<P>(self, predicate: P) -> Filter<Self, P>
where Self: Sized, P: FnMut(&Self::Item) -> bool,

Keeps items of the stream for which predicate returns true. Read more
§

fn filter_map<T, F>(self, f: F) -> FilterMap<Self, F>
where Self: Sized, F: FnMut(Self::Item) -> Option<T>,

Filters and maps items of the stream using a closure. Read more
§

fn take(self, n: usize) -> Take<Self>
where Self: Sized,

Takes only the first n items of the stream. Read more
§

fn take_while<P>(self, predicate: P) -> TakeWhile<Self, P>
where Self: Sized, P: FnMut(&Self::Item) -> bool,

Takes items while predicate returns true. Read more
§

fn map_while<B, P>(self, predicate: P) -> MapWhile<Self, P>
where Self: Sized, P: FnMut(Self::Item) -> Option<B>,

Maps items while predicate returns Some. Read more
§

fn skip(self, n: usize) -> Skip<Self>
where Self: Sized,

Skips the first n items of the stream. Read more
§

fn skip_while<P>(self, predicate: P) -> SkipWhile<Self, P>
where Self: Sized, P: FnMut(&Self::Item) -> bool,

Skips items while predicate returns true. Read more
§

fn step_by(self, step: usize) -> StepBy<Self>
where Self: Sized,

Yields every stepth item. Read more
§

fn chain<U>(self, other: U) -> Chain<Self, U>
where Self: Sized, U: Stream<Item = Self::Item>,

Appends another stream to the end of this one. Read more
§

fn cloned<'a, T>(self) -> Cloned<Self>
where Self: Sized + Stream<Item = &'a T>, T: Clone + 'a,

Clones all items. Read more
§

fn copied<'a, T>(self) -> Copied<Self>
where Self: Sized + Stream<Item = &'a T>, T: Copy + 'a,

Copies all items. Read more
§

fn collect<C>(self) -> CollectFuture<Self, C> ⓘ
where Self: Sized, C: Default + Extend<Self::Item>,

Collects all items in the stream into a collection. Read more
§

fn try_collect<T, E, C>(self) -> TryCollectFuture<Self, C> ⓘ
where Self: Sized + Stream<Item = Result<T, E>>, C: Default + Extend<T>,

Collects all items in the fallible stream into a collection. Read more
§

fn partition<B, P>(self, predicate: P) -> PartitionFuture<Self, P, B> ⓘ
where Self: Sized, B: Default + Extend<Self::Item>, P: FnMut(&Self::Item) -> bool,

Partitions items into those for which predicate is true and those for which it is false, and then collects them into two collections. Read more
§

fn fold<T, F>(self, init: T, f: F) -> FoldFuture<Self, F, T> ⓘ
where Self: Sized, F: FnMut(T, Self::Item) -> T,

Accumulates a computation over the stream. Read more
§

fn try_fold<T, E, F, B>( &mut self, init: B, f: F, ) -> TryFoldFuture<'_, Self, F, B> ⓘ
where Self: Sized + Stream<Item = Result<T, E>> + Unpin, F: FnMut(B, T) -> Result<B, E>,

Accumulates a fallible computation over the stream. Read more
§

fn scan<St, B, F>(self, initial_state: St, f: F) -> Scan<Self, St, F>
where Self: Sized, F: FnMut(&mut St, Self::Item) -> Option<B>,

Maps items of the stream to new values using a state value and a closure. Read more
§

fn fuse(self) -> Fuse<Self>
where Self: Sized,

Fuses the stream so that it stops yielding items after the first None. Read more
§

fn cycle(self) -> Cycle<Self>
where Self: Sized + Clone,

Repeats the stream from beginning to end, forever. Read more
§

fn enumerate(self) -> Enumerate<Self>
where Self: Sized,

Enumerates items, mapping them to (index, item). Read more
§

fn inspect<F>(self, f: F) -> Inspect<Self, F>
where Self: Sized, F: FnMut(&Self::Item),

Calls a closure on each item and passes it on. Read more
§

fn nth(&mut self, n: usize) -> NthFuture<'_, Self> ⓘ
where Self: Unpin,

Gets the nth item of the stream. Read more
§

fn last(self) -> LastFuture<Self> ⓘ
where Self: Sized,

Returns the last item in the stream. Read more
§

fn find<P>(&mut self, predicate: P) -> FindFuture<'_, Self, P> ⓘ
where Self: Unpin, P: FnMut(&Self::Item) -> bool,

Finds the first item of the stream for which predicate returns true. Read more
§

fn find_map<F, B>(&mut self, f: F) -> FindMapFuture<'_, Self, F> ⓘ
where Self: Unpin, F: FnMut(Self::Item) -> Option<B>,

Applies a closure to items in the stream and returns the first Some result. Read more
§

fn position<P>(&mut self, predicate: P) -> PositionFuture<'_, Self, P> ⓘ
where Self: Unpin, P: FnMut(Self::Item) -> bool,

Finds the index of the first item of the stream for which predicate returns true. Read more
§

fn all<P>(&mut self, predicate: P) -> AllFuture<'_, Self, P> ⓘ
where Self: Unpin, P: FnMut(Self::Item) -> bool,

Tests if predicate returns true for all items in the stream. Read more
§

fn any<P>(&mut self, predicate: P) -> AnyFuture<'_, Self, P> ⓘ
where Self: Unpin, P: FnMut(Self::Item) -> bool,

Tests if predicate returns true for any item in the stream. Read more
§

fn for_each<F>(self, f: F) -> ForEachFuture<Self, F> ⓘ
where Self: Sized, F: FnMut(Self::Item),

Calls a closure on each item of the stream. Read more
§

fn try_for_each<F, E>(&mut self, f: F) -> TryForEachFuture<'_, Self, F> ⓘ
where Self: Unpin, F: FnMut(Self::Item) -> Result<(), E>,

Calls a fallible closure on each item of the stream, stopping on first error. Read more
§

fn zip<U>(self, other: U) -> Zip<Self, U>
where Self: Sized, U: Stream,

Zips up two streams into a single stream of pairs. Read more
§

fn unzip<A, B, FromA, FromB>(self) -> UnzipFuture<Self, FromA, FromB> ⓘ
where FromA: Default + Extend<A>, FromB: Default + Extend<B>, Self: Sized + Stream<Item = (A, B)>,

Collects a stream of pairs into a pair of collections. Read more
§

fn or<S>(self, other: S) -> Or<Self, S>
where Self: Sized, S: Stream<Item = Self::Item>,

Merges with other stream, preferring items from self whenever both streams are ready. Read more
§

fn race<S>(self, other: S) -> Race<Self, S>
where Self: Sized, S: Stream<Item = Self::Item>,

Merges with other stream, with no preference for either stream when both are ready. Read more
§

fn drain(&mut self) -> Drain<'_, Self>

Yields all immediately available values from a stream. Read more
§

fn boxed<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + Send + 'a>>
where Self: Sized + Send + 'a,

Boxes the stream and changes its type to dyn Stream + Send + 'a. Read more
§

fn boxed_local<'a>(self) -> Pin<Box<dyn Stream<Item = Self::Item> + 'a>>
where Self: Sized + 'a,

Boxes the stream and changes its type to dyn Stream + 'a. Read more
§

impl<St> StreamExt for St
where St: Stream + ?Sized,

§

fn next(&mut self) -> Next<'_, Self>
where Self: Unpin,

Consumes and returns the next value in the stream or None if the stream is finished. Read more
§

fn try_next<T, E>(&mut self) -> TryNext<'_, Self>
where Self: Stream<Item = Result<T, E>> + Unpin,

Consumes and returns the next item in the stream. If an error is encountered before the next item, the error is returned instead. Read more
§

fn map<T, F>(self, f: F) -> Map<Self, F>
where F: FnMut(Self::Item) -> T, Self: Sized,

Maps this stream’s items to a different type, returning a new stream of the resulting type. Read more
§

fn map_while<T, F>(self, f: F) -> MapWhile<Self, F>
where F: FnMut(Self::Item) -> Option<T>, Self: Sized,

Map this stream’s items to a different type for as long as determined by the provided closure. A stream of the target type will be returned, which will yield elements until the closure returns None. Read more
§

fn then<F, Fut>(self, f: F) -> Then<Self, Fut, F>
where F: FnMut(Self::Item) -> Fut, Fut: Future, Self: Sized,

Maps this stream’s items asynchronously to a different type, returning a new stream of the resulting type. Read more
§

fn merge<U>(self, other: U) -> Merge<Self, U>
where U: Stream<Item = Self::Item>, Self: Sized,

Combine two streams into one by interleaving the output of both as it is produced. Read more
§

fn filter<F>(self, f: F) -> Filter<Self, F>
where F: FnMut(&Self::Item) -> bool, Self: Sized,

Filters the values produced by this stream according to the provided predicate. Read more
§

fn filter_map<T, F>(self, f: F) -> FilterMap<Self, F>
where F: FnMut(Self::Item) -> Option<T>, Self: Sized,

Filters the values produced by this stream while simultaneously mapping them to a different type according to the provided closure. Read more
§

fn fuse(self) -> Fuse<Self>
where Self: Sized,

Creates a stream which ends after the first None. Read more
§

fn take(self, n: usize) -> Take<Self>
where Self: Sized,

Creates a new stream of at most n items of the underlying stream. Read more
§

fn take_while<F>(self, f: F) -> TakeWhile<Self, F>
where F: FnMut(&Self::Item) -> bool, Self: Sized,

Take elements from this stream while the provided predicate resolves to true. Read more
§

fn skip(self, n: usize) -> Skip<Self>
where Self: Sized,

Creates a new stream that will skip the n first items of the underlying stream. Read more
§

fn skip_while<F>(self, f: F) -> SkipWhile<Self, F>
where F: FnMut(&Self::Item) -> bool, Self: Sized,

Skip elements from the underlying stream while the provided predicate resolves to true. Read more
§

fn all<F>(&mut self, f: F) -> AllFuture<'_, Self, F>
where Self: Unpin, F: FnMut(Self::Item) -> bool,

Tests if every element of the stream matches a predicate. Read more
§

fn any<F>(&mut self, f: F) -> AnyFuture<'_, Self, F>
where Self: Unpin, F: FnMut(Self::Item) -> bool,

Tests if any element of the stream matches a predicate. Read more
§

fn chain<U>(self, other: U) -> Chain<Self, U>
where U: Stream<Item = Self::Item>, Self: Sized,

Combine two streams into one by first returning all values from the first stream then all values from the second stream. Read more
§

fn fold<B, F>(self, init: B, f: F) -> FoldFuture<Self, B, F>
where Self: Sized, F: FnMut(B, Self::Item) -> B,

A combinator that applies a function to every element in a stream producing a single, final value. Read more
§

fn collect<T>( self, ) -> Collect<Self, T, <T as FromStreamPriv<Self::Item>>::InternalCollection>
where T: FromStream<Self::Item>, Self: Sized,

Drain stream pushing all emitted values into a collection. Read more
§

fn timeout(self, duration: Duration) -> Timeout<Self>
where Self: Sized,

Applies a per-item timeout to the passed stream. Read more
§

fn timeout_repeating(self, interval: Interval) -> TimeoutRepeating<Self>
where Self: Sized,

Applies a per-item timeout to the passed stream. Read more
§

fn throttle(self, duration: Duration) -> Throttle<Self>
where Self: Sized,

Slows down a stream by enforcing a delay between items. Read more
§

fn chunks_timeout( self, max_size: usize, duration: Duration, ) -> ChunksTimeout<Self>
where Self: Sized,

Batches the items in the given stream using a maximum duration and size for each batch. Read more
§

fn peekable(self) -> Peekable<Self>
where Self: Sized,

Turns the stream into a peekable stream, whose next element can be peeked at without being consumed. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, !>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more